1. Reasonable design:
Most of the steam generator has a vertical pipe structure. The
upper and lower tubes of the main body are welded together with two
coils of water pipes that form a flue gas triple stroke with the
shell casing.The flue gas has a long heat transfer, a large heat
area and a reasonable construction.The burner is placed on the top
of the body and the flame can expand and burn.
2. High efficiency and energy savings:
The thermal efficiency of the steam generator can achieve more than
92%, and the condenser steam generator can achieve more than 96%.
3. Specifications for manufacturing:
Meat -producing components are manufactured in accordance with
national and international standards (ISO). Strict production
processes are closely monitored at all stages of production to
ensure reliable product quality.
4. Drying of steam:
A steam generator with built -in steam water separator can deliver
high quality steam. Because it is steam. Steam helps eliminate
unnecessary extra condensation, saving fuel, reducing system
scaling and extending service life.
5. Reliable and sustainable:
Excellent steam generator design, excellent production technology,
strict quality control are the quality assurance of each steam
generator.
Technical Parameters
Main Technical Reference for Fuel (Gas) Steam Generator
| Item Unit | LSS0.05 | LSS0.1 | LSS0.15 | LSS0J2 |
| Rated evaporation | Kg/h | 50 | 100 | 150 | 200 |
| Rated Pressure PTEPREppoPressure | MPa | 0.4/0.7 |
| Rated steam temperature | c | 151/171 |
| Rated feed water temperature | °C | 20 |
| Evaporator efficiency | / | >92% |
| Applicable Fuel | / | Gas light oil |
| Theoretical fuel consumption | Gas | NM3/h | 4 | 8 | 12 | 16 |
| Light Oil | Kg/h | 3.3 | 6.5 | 9.8 | 13 |
| Gas supply pressure | mbar | 60- 100 |
| water volume | L | <30 |
Note: The fuel consumption in the table is based on the low
calorific value of biomass particles 17084 KJ/Kg (4085
Kcal/Kg).Calculations show that if the low calorific value of
biomass fuel is higher than that, the corresponding fuel
consumption will be more economical than the values in the table.
Configuration and Interface Size of Fuel (Gas) Steam Generator
| Item Unit | LSS0.05 | LSSO.l | LSS0.15 | LSS0.2 |
Outward Size of Main Engine
(length * width * height) | / | mm | 620*620*830 | 690*690*968 | 750*750*1130 | 800*800*1286 |
Transport Dimension
| / | t | 206 | 252 | 303 | 350 |
| Mainframe Transport Weight | DN | mm | G 1/2- | Gl' | Gl" | G 1* |
| Main Steam Valve Pipe Diameter | DN | mm | Gl/2" | Gl/2- | Gl/2- | Gl/2° |
| Feed Water Valve | DN | mm | G1 1/4” | G11/4- | G11/4- | G11/4- |
| Safety Valve Diameter | DN | mm | Gf | GF | Gl" | Gl" |
| Drain Valve Pipe Diameter | DN | mm | 133 | 133 | 159 | 159 |
Remarks: We will reserve rights to change the above mentioned data
due to continuous policy transformation and product improvement.
